Complet Composite Pellets PlastiComp - Global Source For Long Fiber Technology

Technical Data Sheet

PlastiComp Name: Complēt® LCF50-PA66
Polymer Matrix: Nylon 66 (Polyamide 66)
Reinforcement Type: Long Carbon Fiber
Fiber Content (Weight Percent): 50%
Color(s): Black
Processing Method: Injection Molding
Availability: Global
Complēt® LCF50-PA66 is a 50% long carbon fiber reinforced nylon 66 (polyamide 66) thermoplastic composite manufactured using a pultrusion process that melt impregnates the fiber with the matrix resin to maximize performance. Long carbon fiber reinforcement provides this composite with significantly increased stiffness and strength. This composite’s mechanical properties allow its use in a wide range of applications across multiple market segments as a lightweight replacement for metals or as an engineered substitute for other materials.
English SI Metric Test Method

Specific Gravity 1.37 1.37 ASTM D-792

Tensile Strength 45,000 psi 310 MPa ASTM D-638

Tensile Modulus 5,800 ksi 40000 MPa ASTM D-638

Tensile Elongation 1 % 1 % ASTM D-638

Flexural Strength 72,000 psi 497 MPa ASTM D-790

Flexural Modulus 4,250 ksi 29310 MPa ASTM D-790

Notched Izod Impact 4.0 ft·lb/in 214 J/m ASTM D-256

Un-notched Izod Impact 16.0 ft·lb/in 854 J/m ASTM D-4812

DTUL @ 264 psi (1820 kPa) 485 °F 252 °C ASTM D-648

Rev 07/14
Molding guidelines and processing conditions for Complēt long fiber composite pellets are available in our Material Processing Guide. Please contact our technical support team if you require additional information regarding processing a particular product or guidance resolving problems.
Safety Data Sheets (SDS or MSDS) for Complēt long fiber composite pellets are available through MSDSonline or upon request from our customer service team.
This compound complies with European Union Directive 2002/95/EC Restriction of Hazardous Substances (RoHS).
Values included in this Property Data Sheet are based on limited laboratory test specimens. These values are typical values and are not meant to be used for setting maximum or minimum values for specification purposes. Any determination of the suitability of the materials shown in this property data sheet for use by the end user is the sole responsibility of the user, who must assure himself that the material as subsequently processed meets the need of his particular product or use. To the best of our knowledge the information in this publication is accurate and reliable, PlastiComp does not assume any liability whatsoever for the accuracy of this information.

Acrobat PDF Files