Complet Composite Pellets PlastiComp - Global Source For Long Fiber Technology

Technical Data Sheet

PlastiComp Name: Complēt® LGF40-PA66 MT
Polymer Matrix: Nylon 66 (Polyamide 66)
Reinforcement Type: Long Glass Fiber
Fiber Content (Weight Percent): 40%
Color(s): Natural, Black, and Custom Colors
Processing Method: Injection Molding
Availability: Global
Complēt® LGF40-PA66 MT is a maximum toughness 40% long glass fiber reinforced nylon 66 (polyamide 66) thermoplastic composite manufactured using a pultrusion process that melt impregnates the fiber with the matrix resin to maximize performance. Impact modification provides this composite with the highest level of durability obtainable in a long glass fiber reinforced material. This composite’s mechanical properties allow its use in a wide range of applications across multiple market segments as a lightweight replacement for metals or as an engineered substitute for other materials.
English SI Metric Test Method

Specific Gravity 1.45 1.45 ASTM D-792

Tensile Strength 30,000 psi 207 MPa ASTM D-638

Tensile Modulus 2,000 ksi 13793 MPa ASTM D-638

Tensile Elongation 2-3 % 2-3 % ASTM D-638

Flexural Strength 43,000 psi 297 MPa ASTM D-790

Flexural Modulus 1,400 ksi 9655 MPa ASTM D-790

Notched Izod Impact 9.5 ft·lb/in 507 J/m ASTM D-256

Un-notched Izod Impact 30.0 ft·lb/in 1602 J/m ASTM D-4812

DTUL @ 264 psi (1820 kPa) 475 °F 246 °C ASTM D-648

Rev 01/15
Molding guidelines and processing conditions for Complēt long fiber composite pellets are available in our Material Processing Guide. Please contact our technical support team if you require additional information regarding processing a particular product or guidance resolving problems.
Safety Data Sheets (SDS or MSDS) for Complēt long fiber composite pellets are available through MSDSonline or upon request from our customer service team.
This compound complies with European Union Directive 2002/95/EC Restriction of Hazardous Substances (RoHS).
Values included in this Property Data Sheet are based on limited laboratory test specimens. These values are typical values and are not meant to be used for setting maximum or minimum values for specification purposes. Any determination of the suitability of the materials shown in this property data sheet for use by the end user is the sole responsibility of the user, who must assure himself that the material as subsequently processed meets the need of his particular product or use. To the best of our knowledge the information in this publication is accurate and reliable, PlastiComp does not assume any liability whatsoever for the accuracy of this information.

Acrobat PDF Files