Complet Composite Pellets PlastiComp - Global Source For Long Fiber Technology

Technical Data Sheet

PlastiComp Name: Complēt® LGF40-TPU CLEAR
Polymer Matrix: Rigid Thermoplastic Polyurethane (TPU)
Reinforcement Type: Long Glass Fiber
Fiber Content (Weight Percent): 40%
Color(s): Naturally Translucent
Processing Method: Injection Molding
Availability: Global
Complēt® LGF40-TPU CLEAR is a 40% long glass fiber reinforced rigid thermoplastic polyurethane (TPU) composite manufactured using a pultrusion process that melt impregnates the fiber with the matrix resin to maximize performance. Long glass fiber reinforcement provides this composite with increased stiffness, strength, and durability. Unique chemistry matches the refractive indices of the polymer and glass fiber to produce a translucent material with surface contact transparency. Translucent characteristics allow it to be used for see-through designs while retaining structural performance.
English SI Metric Test Method

Specific Gravity 1.51 1.51 ASTM D-792

Tensile Strength 34,000 psi 234 MPa ASTM D-638

Tensile Modulus 1,900 ksi 13103 MPa ASTM D-638

Tensile Elongation 2-3 % 2-3 % ASTM D-638

Flexural Strength 56,000 psi 386 MPa ASTM D-790

Flexural Modulus 2,000 ksi 13793 MPa ASTM D-790

Notched Izod Impact 9.0 ft·lb/in 481 J/m ASTM D-256

Un-notched Izod Impact 29.0 ft·lb/in 1549 J/m ASTM D-4812

DTUL @ 264 psi (1820 kPa) 235 °F 113 °C ASTM D-648

Rev 08/12
Molding guidelines and processing conditions for Complēt long fiber composite pellets are available in our Material Processing Guide. Please contact our technical support team if you require additional information regarding processing a particular product or guidance resolving problems.
Safety Data Sheets (SDS or MSDS) for Complēt long fiber composite pellets are available through MSDSonline or upon request from our customer service team.
This compound complies with European Union Directive 2002/95/EC Restriction of Hazardous Substances (RoHS).
Values included in this Property Data Sheet are based on limited laboratory test specimens. These values are typical values and are not meant to be used for setting maximum or minimum values for specification purposes. Any determination of the suitability of the materials shown in this property data sheet for use by the end user is the sole responsibility of the user, who must assure himself that the material as subsequently processed meets the need of his particular product or use. To the best of our knowledge the information in this publication is accurate and reliable, PlastiComp does not assume any liability whatsoever for the accuracy of this information.

Acrobat PDF Files