|
 |
May 8-9, 2008
Winona, MN |
| |
| Back
to 2008 Newsletters |
| |
| |
| Download PDF Format (820KB) |
| |
On May 8th and 9th, 2008, PlastiComp was the host for a global LFT Forum. Participants
included licensed LFT pellet producers and several glass fiber producers. During 2007, PlastiComp delivered and installed six new LFT lines; three in Europe, two in Asia
and one additional line at PlastiComp in Winona. |
| |
| Maximum toughness LFT nylon introduced |
| PlastiComp has introduced a new maximum toughness LFT nylon. Customers report that this compound is the toughest nylon material that they have ever molded, yet it molds very easily and the parts have outstanding surface finish. Call Rhonda for a free sample of Complēt® LGF50-PA66 MT. This will have a great impact on your business! |
| |
| New Technical Development Center |
Our corporate offices and Technical Development Center (TDC) have been relocated to 110
Galewski Drive. Our McConnon facility has also expanded with a new and larger capacity LFT
pellet line. The new TDC facility provides additional expansion space for future technical resources.Today, it houses four injection molding machines and two Pushtrusion™ units. We recently installed a 250 ton compression molding machine for further developing our new D-GMT™ technology – “no sheet”. |
| |
| Dr. Raj Mathur joins PlastiComp as Business Development Manager |
PlastiComp LLC is pleased to announce that it has hired Raj Mathur as Business Development Manager. Raj will help PlastiComp further evolve its advanced materials
and processes.
 “I am very pleased to be part of PlastiComp because of its intellectual portfolio in advanced engineering plastics that yields superior material properties well suited to industrial production,” said Mathur. “PlastiComp also has a global outreach that is vital for strong business growth and positions the company as a leader in the industry.” Mathur has over 18 years experience in strategic program and product management, with ten of those years focused on international markets and development. He has served as consultant and manager for key industry leaders, including: Imation Corporation, Conoco, and HITCO Carbon Composites Inc.
As thermoplastics gain a foot-hold as the material of choice in sustainable applications, an important goal for Mathur is building product and process portfolios in various industrial sectors with special emphasis on providing customers with solutions. These solutions are especially suited for applications where current material selection is not optimized for engineering needs and overall value. |
| |
| |
Pushtrusion™ and D-GMT™ are trademarks and
Complēt® is a registered trademark of Plasticomp LLC |
| |
| Please send us your questions or comments using the request form. |
| |
 |
| |
| |
| Back
to 2008 Newsletters |
| |
|
About Us | Pushtrusion | Complēt | R&D | Specialty Molding
Technical Library | News | Career Opportunities | Contact
© Copyright 2008 PlastiComp, LLC | Powered by Itechra |
| |
|
| |
