PlastiComp™ LLC announces a breakthrough in long fiber reinforced thermoplastic (LFRT) compounding with the introduction of its advanced line of Complēt® composite pellets. The new LFRT technology solves several manufacturing problems by providing improved product consistency in a "single pellet" solution. Complēt® incorporates into one complete compounded pellet the total LFRT portfolio including impact modifiers, additives, and colorants.

"According to testing conducted by our customers, Complēt® composite pellets deliver superior part weight consistency and aesthetics compared to competitive products," said Steve Bowen, PlastiComp™ LLC President and CEO.

Other LFRT blending approaches, such as dry blending, can lead to segregation of the different pelletized materials during transport and conveying causing the molded part weight to vary by more than 5%. PlastiComp’s single Complēt® pellet approach improves the quality of molded parts, making them more uniform and consistent. Complēt® is also formulated to meet precise customer requirements.

"With Complēt®, molders do not have to worry about variation and our customers are already noticing tremendous improvements in the quality of their parts," said Bowen. “PlastiComp™ LLC is the first to introduce this important technology to the market.”

Complēt® technology can be applied to the majority of applications that traditionally were molded using dry blended pellets. PlastiComp’s dedicated and experienced team works directly with customers to define their ideal Complēt® pellet composition and to shorten their development cycles. Customers can purchase Complēt® directly from PlastiComp LLC, or from the global licensees of PlastiComp™ LLC LFRT technology located in Europe and Asia.

PlastiComp™ LLC is unique in providing both long fiber reinforced thermoplastic (LFRT) technology and direct long fiber reinforced thermoplastic (D-LFRT) technology to global customers. Complēt® composite pellets provide a single pellet solution for customers with stringent requirements and rapid speed to market demands. In contrast, Pushtrusion™ direct in-line compounding offers a complementary approach by providing substantial savings compared to pre-compounded thermoplastic composite pellets. PlastiComp™ LLC also offers advanced contract molding along with research and development services including formula development, material and part testing, and evaluation.

For additional information, contact:
PlastiComp™, LLC USA
4455 Theurer Blvd.
Winona, MN 55987 USA

(507) 454 4334
info@plasticomp.com

PlastiComp™, LLC USA - Corporate Headquarters
4455 Theurer Blvd.
Winona, MN 55987 USA

PlastiComp™, LLC USA - Technical Development Center
25 McConnon Drive
Winona, MN 55987 USA

PlastiComp™, LLC Europe GmbH – Technical Sales Center
4650 AC Steenbergen
The Netherlands


Back to 2007 Releases