 Patrick
H. Johnson has joined PlastiComp™, LLC as Sales Representative
in the southeastern United States, company President Steve
Bowen announced today.
A veteran of the Long Fiber Reinforced Thermoplastics (D-LFT)
industry, Johnson worked previously with Bowen as Vice President
of Sales and Marketing for the Celstran long fiber business
of Hoechst. Most recently, Johnson was President of Applied
Fiber Systems, Ltd, a market leading continuous fiber reinforced
thermoplastics manufacturer located in Clearwater, Florida.
Applied Fiber Systems was recently acquired by Hexcel Corporation.
“Pat brings a great deal of experience with thermoplastic
materials. His reputation in the marketplace for integrity
and innovation was established by working with customers to
understand their needs to develop solutions that improve their
businesses,” said Bowen.
“Pat’s joining with us is a good indication to
our past and future customers that PlastiComp™, LLC is preparing
for an opportunity to work with them with new composites innovations
and reinforced thermoplastic technology. Pat and I are excited
about the opportunity to work together again in this exciting
growth market,” Bowen concluded. PlastiComp™, LLC provides
technology and products focused on the long fiber reinforced
thermoplastics market, including long fiber pellet production,
equipment and Pushtrusion® technology for direct in-line
compounding. With Pushtrusion® technology continuous
reinforcing fibers and molten polymers are combined during
the parts-forming process, eliminating the need for pre-compounded
pellets. Parts performance is usually improved, while raw
materials costs are dramatically lowered. Pushtrusion®
technology is compact and can be retrofit to existing injection
molding machinery.
PlastiComp™, LLC is the exclusive source for both Pushtrusion®
Direct Long-Fiber Thermoplastics (D-LFT) process and for Complēt®
composite pellets. Complēt® composite pellets are
complimentary to Pushtrusion®, providing the convenience
of fast response for special needs and short production requirements,
while Pushtrusion® Direct In-Line Compounding provides
substantial savings on raw material costs while delivering
higher performance from thermoplastic composite materials.
For additional information, contact:
PlastiComp™, LLC USA
4455 Theurer Blvd.
Winona, MN 55987 USA
(507) 454 4334
info@plasticomp.com
PlastiComp™, LLC USA - Corporate Headquarters
4455 Theurer Blvd.
Winona, MN 55987 USA
PlastiComp™, LLC USA - Technical Development Center
25 McConnon Drive
Winona, MN 55987 USA
PlastiComp™, LLC Europe GmbH – Technical Sales
Center
4650 AC Steenbergen
The Netherlands
Back to 2004
Releases
|
